Habcool 318 SuperTapping Oil
An economical answer to the machining of problem metals
Recommended by the leading tap and die manufacturers in
the United States and Canada for tapping, threading and production
machining for all alloys. HABCOOL 318, a
compound of many ingredients, is constantly upgraded to keep pace with metallurgical
developments.
Habcool 318 is a high quality extreme pressure
metal cutting lubricant
with effective load carrying properties
and superior anti-weld ingredients.
- No volatile solvents - HABCOOL 318 tapping
oil contains no solvents to evaporate your cutting oil
dollars.
- Safe to use - The same handling practices
used with any petroleum oil are satisfactory with HABCOOL
318.
- High flash test - A high flash minimizes
fire hazards.
- Transparent - HABCOOL 318 will not hide
the work-piece, yet clings to tool and job to insure constant
lubrication.
- Will not discolor metals - Even on copper
only slight discoloration is evident after immersion for
15-20
hours.
- Cannot harm machines - The base of HABCOOL
318 is a high quality machine oil designed to eliminate
bearing
problems
should
penetration of cutting oil into the lube oil system occur.
HABCOOL 318 is
extremely versatile,
and not limited to one particular
operation.
- Tapping
- Thread Rolling
- Drilling
- Reaming
- Cold Forming
|
- Milling
- Drawing
- Broaching
- Thread Milling
- General Machining
|
Habcool 318 as a Cutting Oil Base
HABCOOL 318 is normally used full strength, and applied
by brush or pour spout can to the tap or chaser. An exceptional
cutting oil for use in bar machines
and chuckers can be easily and inexpensively made by adding HABCOOL 318 to
a light mineral oil in a proportion suitable to the toughness of the
metal being machined. As an example: Many metal working plants are blending
their cutting oils using mineral oil of 150-200 viscosity SSU blended with
HABCOOL 318 tapping oil. For production machining in turret lathes, automatic
tappers, screw machines, chuckers, etc. HABCOOL 318 tapping oil is recommended
to be blended at 25% to 50% by volume depending upon the machinability of
the material and the severity of the machining operations involved.
A proper combination of HABCOOL tapping oil and mineral oil will reduce
heat and friction and allow an increase in cutting speeds
and feeds.
Experienced Technical Service
is available at any time to help solve your problems. Please
call 973-664-0144.
Experienced field personnel will be glad to cooperate with
your firm
on any problem.
It should be remembered that cutting oils are not a cure-all.
Proper tooling, accurately ground and honed, together
with the correct speeds and feeds should
be established first. With these conditions met, cutting lubricants of
the right type will make the difference between a poor job
and an outstanding
and economical one.
Readily Available
HABCOOL 318 is available from leading
tool distributors in the U.S. and Canada. HABCOOL 318 is
packed in 1 and 5 gallon plastic pails, and 30 and
55 gallon steel drums. All containers are sealed for
your protection.
Habcool 277 Light and Clear
A companion product to HABCOOL 318,
Habcool 277 Light and Clear allows you to see the work piece. It is a premium heavy duty cutting oil for production machining
of all high alloy steels. Where the tool and workpiece are
flooded, HABCOOL 277 Light and Clear will drill, thread, broach and mill these
alloys with exceptional tool life and increased production.
HABCOOL 277 Light and Clear is pleasant to work with and has a mild odor.
The material is based on high quality lubricating oil and will
not harm fine machine tools.
Habcool 277
A companion product to HABCOOL 318,
277 is a premium heavy duty cutting oil for production machining
of all high alloy steels. Where the tool and workpiece are
flooded, HABCOOL 277 will drill, thread, broach and mill these
alloys with exceptional tool life and increased production.
HABCOOL 277 is pleasant to work with and has a mild odor.
The material is based on high quality lubricating oil and will
not harm fine machine tools
|